How to Disassemble Your Sleep Number Lifestyle Collection Furniture

Quick Answer

To disassemble your Sleep Number Lifestyle Collection furniture:

1. Turn off power and unplug the furniture.
2. Disconnect all electronic connections.
3. Remove accessories such as support bars and side tables.
4. Remove both wings from the headboard.
5. Disconnect the side rails.
6. Remove the footboard.
7. Protect and label all parts for storage or moving.

Use this guide when moving your furniture, storing it temporarily, or preparing for reassembly in a new location.

Before You Begin

To make reassembly easier:

• Remove all bedding and mattress components.
• Take photos of wire connections before disconnecting them.
• Keep screws and hardware in a labeled container or bag.
• Have another person available to help lift larger furniture components.
• Save protective packaging if available.

What You'll Need

• Phillips screwdriver
• Allen wrench (if required for your model)
• Small container or bag for hardware
• Protective wrap or packing materials
• Access to the power outlet so electronics can be unplugged

How to Disassemble Lifestyle Collection Furniture

Step 1: Power Down and Unplug

1. Turn off the red power switch on the headboard control panel.
2. Unplug the power cord from the back of the headboard.
3. Remove both remotes from the charging dock.

 Step 2: Disconnect Electronic Components

1. Unplug any accessories connected to the headboard control panel.
2. Disconnect all square and round cable connections between:
   • Headboard
   • Side rails
   • Wings

Make sure all cables are fully disconnected before removing furniture components.

Step 3: Remove Accessories

If installed:

1. Lift the support bar out of its mounting holes.
2. Remove any side tables.
3. Remove the leather cover and store it safely for future use.
   

Step 4: Remove the Wings

1. Stand beside one wing.
2. Press gently against the side of the wing.
3. Slide the wing upward to release it from the silver and black brackets.
4. Repeat on the opposite side.

Step 5: Remove the Side Rails

1. Locate where the side rail connects to the headboard.
2. Lift the side rail upward at the corner connection point.
3. Unclip the side rail from the headboard.

Repeat on the opposite side.

Step 6: Remove the Footboard

1. Lift the side rail at one corner to release the footboard connection.
2. Repeat on the opposite corner.
3. Separate the footboard from the side rails.

The major furniture components should now be separated and ready for transport or storage.

Prepare Furniture for Moving or Storage

Before moving or storing your furniture:

• Wrap upholstered pieces to help prevent tears and damage.
• Store all hardware in a clearly labeled bag.
• Keep electronic components dry and protected.
• Avoid placing heavy items on top of upholstered parts.
• Verify that all parts have been accounted for before discarding packaging materials.

Reassembling Your Lifestyle Collection Furniture

When you're ready to set up your furniture again, follow the Lifestyle Collection assembly instructions and reconnect all electronic components before restoring power.

Troubleshooting During Disassembly

A Wing Won't Slide Off

• Verify all connected cables have been disconnected.
• Apply upward pressure while supporting the wing.
• Have another person help stabilize the component.

A Side Rail Won't Release

• Lift from the corner connection point.
• Confirm the rail is fully disengaged from the headboard connection location.

Missing Hardware

Store all screws, brackets and small parts together during disassembly. If hardware is missing before reassembly, contact Sleep Number Support for assistance.

Frequently Asked Questions

How do I disassemble Sleep Number Lifestyle Collection furniture?

Power off the furniture, disconnect electronics, remove accessories, remove both wings, detach the side rails, and then remove the footboard.

Do I need any special tools?

Most Lifestyle Collection furniture can be disassembled using a Phillips screwdriver. Some models may also require an Allen wrench.

Can I move Lifestyle Collection furniture by myself?

Because some furniture components are large or heavy, Sleep Number recommends working with another person.

Should I keep the hardware?

Yes. Store all screws, brackets and small parts in a labeled container or bag to make reassembly easier.

Where can I find assembly instructions?

Refer to the Lifestyle Collection assembly instructions when you are ready to reassemble your furniture.

Need More Help?

If you need assistance with disassembly, moving preparation, or reassembly, contact Sleep Number Customer Support or use Chat Support for additional help.