Applies to: All Sleep Number smart bed models except the Sleep Number c1, iLE, and pSE smart beds (follow pairing instructions for 360 remotes)
When to Pair
- You have received a new or replacement remote.
Jump to:
-
Sleep Number Smart Bed with FlexFit™ adjustable smart base
-
Sleep Number Smart Bed with Integrated Base or Mattress only
-
How to change a name for either side of the bed
-
Sleep Number Smart Remote Troubleshooting
- Sleep Number Smart Bed Remote Quick Start Guide
Sleep Number Smart Bed with FlexFit™ adjustable smart base
Important: Do not set the remote down until finished. The screen will go to sleep, and you will have to start over.
Before You Begin
- Ensure your remote has new AA batteries.
- Remove all non-bedding items from the bed.
- The bed is plugged in and receiving power.
Pair Your Remote
- Within the remote, navigate to the Settings menu.
- Select Pair Bed.
- On the side of the adjustable base, press and hold the favorite button for 5 seconds until it starts to flash blue, then release.
- Follow prompts on remote.
- If successful, the Bluetooth icon in the top left corner of the remote screen will go from blinking to solid when pairing is complete.
Sleep Number smart bed with Integrated Base or Mattress Only
Important: Do not set the remote down until finished. The screen will go to sleep, and you will have to start over.
Before you begin
- Ensure your remote has new AA batteries.
- Remove all non-bedding items from the bed.
- The bed is plugged in and receiving power.
Pair Your Remote
- Go to the Settings menu on your remote.
- Select Pair Bed.
- Find the Pair button on the back of your pump.
- Press and hold the Pair button for about 5 seconds until the 2nd LED light starts to blink, then release it.
- Follow the prompts on the remote. The Bluetooth icon in the top left corner of the remote screen will go from blinking to solid when pairing is complete.
"No Smart Bed Found"
- Make sure the Favorite button is still blinking blue and press "Try Again" on the remote.
- If the remote is unable to pair after 3 attempts, remove the batteries from your remote for 10 seconds, re-insert them, and try the pairing process again.
How to Change a Name for Either Side of the Bed
- To change the name for a side of the bed, you will need to do so in the Sleep Number® app.
- Follow the steps under the Edit Sleeper Name dropdown.
- This is not available in the physical Smart Remote.
- The bed must be online to receive the updated names after you make the changes.
- If no names are set up in the app, the remote will default to Left and Right.
Quick Start Guide
Click the link below to download your Sleep Number Smart Bed Remote Quick Start Guide.
Sleep Number Smart Bed Remote Quick Start Guide